микрозайм онлайн займ на киви займ на карту сбербанка

The Chamber of Mines certificates will be phased out on 31 December 2018. These certificates will be replaced by new certificates that will be issued by the QCTO and/or other educational institution. The last entry for new candidates into the system would have been 31 August 2015, but because the assessment tools of the QCTO are not ready this date was postponed until 31 March 2016 for the May 2016 examination.

The last entry for the new candidates will now be 31 August 2016, hopefully the QCTO assessment tools will be ready for the October 2016 examinations as the final entry date cannot be changed.

It must be noted that the final phasing out date of 31 December 2018 for all certificates is final.



The SANIRE AGM was held on the 27th November 2015 at the Ruimsig Country Club. The new format of the AGM comprised of the formalities in the morning followed by lunch and ended off with a round of golf. The AGM provided an overview of the SANIRE strategy for the next 2-5 years. Recognition to outstanding commitment, contribution and achievement through the various award categories was also presented. The AGM was well attended and will hopefully continue to do so in the future. A special thanks must be given to Carol Hunter for all her hard work in making the AGM possible.

Michael du Plessis: President, Awards; RETC
William Joughin ISRM, SAIMM, Eng works, AfriRock
Les Gardner RE Legislation, RETC, SIMRAC
Friedemann Essrich Treasurer, MQA, QCTO, L1-L4 training
Jannie Maritz Future education (RE ticket)
Yolande Jooste Exams committee, Video lectures
Dave Neal Membership, RETC
Hein Greef / Jannie Maritz Young members
Jaco le Roux Website
Robert Armstrong Organisation Liaison
Dave Arnold History, RETC
Paul Couto Newsletter


Naomi Ayres Western Limb
Andreas Esterhuizen Eastern Limb
Temogo Itholeng Freestate
Sandor Petho Coal
Sandy Etchells Gauteng
Glen McGavigan Surface Mining
Quintin Grix North West
Obed Masinge

Northern Cape


Best student Award - Best student at Pretoria University Kara Lombard
Best student Award – Best student at Wits University Lunghile Ngobeni 
Candidate Award - Highest mark > 75% for SCO Theory 85% -Bennett Macuacua
Candidate Award - Highest mark > 75% for Paper 1 82% - Gift Thantsha
Candidate Award - Highest mark > 75% for Paper 2 88% - Jennifer Pilkington
Candidate Award - Highest mark > 75% for Paper 3.1 76% - Moses Modika
Practitioner of the Year Award - Rock Engineer, Strata Control Officer or Observer who contributed significantly outside of what is required by role

Otto van der Merwe


agm1 agm2 agm3
Practitioner of the Year Award
Otto van der Merwe (Left)
Michael du Plessis (Right)
Candidate Award - Highest mark
> 75% for SCO Theory
Bennett Macuacua (Left)
Michael du Plessis (Right)
Candidate Award - Highest mark
> 75% for Paper 3.1
Moses Modika (Left)
Michael du Plessis (Right)


Lifetime Achievement Award - Honorary Membership - Person who made significant contribution - Non technical Apie van Rensburg

Lifetime Achievement Award - Honorary Fellowship - Person who made significant contribution - Technical or other

Michael Roberts
Salamon Award - Person with best (also significant) refereed technical publication

P.J le Roux and Dick Stacey

Measurement and prediction of dilution in a South African gold mine operating with open stoping mining methods

Ortlepp Award - Person with best (also significant) refereed technical publication (less than 35 years old)

A.G Hartzenberg

The influence of regional structures associated with the Bushveld Complex on the mechanism driving the behaviour of the UG2 hangingwall beam and in-stope pillars at Lonmin’s Marikana Operations.


 agm4 agm5 
Michael du Plessis, Prof Dick Stacey, Dr Jaco le Roux Apie van Rensburg
agm6 agm7
Alida Hartzenburg and Michael du Plessis Michael du Plessis and Kim Roberts



pc1At the AGM held in November 2015, we recognised some of our members for their extraordinary achievements and contributions to our fraternity through the grants of awards in various categories. As Rock Engineers, just doing our jobs, we do not always realise the influence we have on those around us. Through mentoring, we develop the skills of our colleagues and we instil a culture of caring, self-worth, ambition and recognition.

In the workplace as technical specialists, we are responsible for ensuring the safety of thousands of workers through our routine monitoring. Our selfless efforts are not always recognised and typically the areas where we make the largest contributions are celebrated by the industry at events such as MineSafe. However, the efforts of the Rock Engineers and the Rock Engineering Departments are not credited for their interventions which contribute to a safer working environment. As a service department, we do not contribute to the bottom line, but we can contribute strongly through our dedication and involvement. In December, the Principal Inspector of the North-West region issued an instruction for all mines in the Rustenburg area to stop their operations and instructed that all areas be assessed by Rock Engineers to ensure that our workers do not work unsafely or become exposed to an unsafe working environment during the “silly season”. The DMR, therefore, recognises the skills we have in the field of strata control.

There are many factors influencing the behaviour of the workers at the face. We can, however, influence their behaviour through ongoing coaching, in the workplace, at the face. Our contributions can only add value to processes such as the entry examination and TARP, which is aimed at creating a safe working environment. We should realise that our actions will assist in upskilling our workers at the face. We can, therefore, make a difference by caring and sharing. It goes beyond celebrating fall-of-ground fatality free shifts or setting new records.

Michael du Plessis - SANIRE President

ebenezerEbenezer Gordon Holder
24 May 1956 - 07 December 2015

I have known Gordon for many years, and worked with him between 1996 and 2002, when I was a member of the Rock Engineering Department at Anglo Platinum at that time. He was the Chief Rock Mechanics Officer. Gordon spent most of his career at Anglo Platinum, and because in the early years there were only a few Rock Engineers employed, he had an intimate knowledge about all the producing shafts.

His time keeping was exemplary, if not extreme – he was always the first to arrive in the office in the mornings and the last to leave in the afternoons. When asked why, his answer was perhaps unsurprising: “My job is my life”.

Another part of Gordon’s work which deserves mentioning was his record keeping and I never saw anyone else doing the same. For underground visits, Gordon had small A6 black books where he wrote what he observed and recommended on any particular day. He would then transfer some important notes from the A6 underground books into his A4 black books which he kept for his daily, planning and various meetings notes. Furthermore, he kept both his book formats bound in clearly labelled volumes. So, if you asked him what he did on any specific day, month and year, Gordon would look into his Register and check which volume and book to open, and he would tell you exactly what he did on that day. All these volumes of books took up most of his vast filing cabinet.

Gordon had very good observation and interpretation skills underground, given his knowledge and long experience. He loved to coach young and upcoming Rock Engineers – like me at that time – and his advice was very valuable. Not only was he a good Rock Engineer, Gordon’s strength was also in his very broad general knowledge regarding mining, engineering, stores management and industrial relations, to mention a few.

Another incredible aspect of Gordon’s life was his ability to speak the Setswana language fluently. He often spoke Setswana with black colleagues in the office or underground and one could see how much they appreciated that.

Gordon left Anglo Platinum in 2009 to spend his time elsewhere; Samancor chrome mines being the last place.

After his sudden passing, Gordon left behind his wife Jenny and his sister Fiona. Gordon’s plans were to retire and move with his wife to the Western Cape where his sister lives. Sadly, Gordon could not fulfil his dream.

By Petr Miovsky
Rock Engineering Manager – Impala Platinum

krugerPaul Kruger van der Heever.
25 April 1947 – 22 December 2015

It is with great personal sadness that I informed you that our friend, colleague and associate of Groundwork passed away peacefully this morning after a long and stoic battle against cancer.

Paul worked on dozens of projects for us after we were fortunately enough to secure the services of this immensely capable man in September 2006. He conducted many geological mapping and stress measurement site evaluation projects, as well as assisting with other geotechnical investigations. For those of you who didn’t know Paul well, he was a geologist and chemist by training who then specialised by obtaining the Chamber of Mines Rock Mechanics Certificate, and also obtained a Master’s Degree in Seismology. His desire to acquire knowledge was endless and he was awarded an MBA Cum Laude while working as the manager of Gencor’s Technical Services Department in Klerksdorp in the 1980s.

Paul was also an incredibly active man who played golf regularly off a low handicap and ran numerous long distance races, including Comrades many times. He had a remarkable and active mind and had many interests and hobbies. However, his passion always seemed to be geology. I called him our bionic geologist as he had the ability to see well beyond the rock surface when making his geological assessments. Despite his incredible technical skills, he had the relatively unique ability to present findings to senior management in a manner which they always understood and appreciated. An example of this is the model he built by himself to assist the shaft personnel to better understand the complex geology at Kloof Main Shaft. He did this in his spare time, without compensation, out of his own enthusiasm for the project. He was always keen to share his formidable knowledge to help others grow and develop.

Paul touched the lives of many people and he will be sorely missed. At this time, our thoughts are with his wife Bets, his children, Paul Junior, Lisa and Marissa, and his six grandchildren.

Kind regards, Phil.
Director - Groundwork Consulting

International Symposium on Slope Stability in Open Pit Mining and Civil Engineering


Dr Loren Lorig presenting his keynote (Photo curtesy of S Coetsee)


The Sixth Slope Stability Symposium was held in Cape Town from the 12th to the 14th of October 2015, hosted by SANIRE in conjunction with SAIMM. The symposium was originally held in Cape Town in 2006 and has subsequently been to Perth (2007), Santiago (2009), Vancouver (2011) and Brisbane (2013). Since it is the only dedicated slope stability conference internationally, it is consistently well attended. While attendance was less than in previous years, as is expected in current times, it still attracted just over 200 delegates, 130 of whom were international. Keynote speakers were Professor Doug Stead from Simon Frasier University, who presented his research on internal failure mechanism during failure, comparing it to current analysis technics; Dr Loren Lorig CEO of Itasca, presented on designing for extreme events; Geogg Beale (Director at Schlumberger Water Services) presented on the importance of surface water management and its impact on slope stability; and Louis Melis (Melis & Du Plessis Consulting Engineers (Pty) Ltd) presented the recent work he has been doing in designing rock fall protection. Fifty-four papers and ten posters were presented and published in a proceedings volume, a selection of which will be published in an upcoming issue of the SAIMM Journal. A slope stability monitoring workshop was presented on the 15th, organised and facilitated by Huw Thomas from the University of the Witwatersrand. Thanks goes out to the organising committee, SAIMM, presenters and the very generous sponsors!

Robert Armstrong,
Chair, Organising Committee.


A recent report on the 2015–2019 commissions was submitted by Prof Doug Stead. While the report was very positive, the lack of participation by the African region was highlighted. South Africa has made significant contributions to the ISRM commissions in the past and SANIRE would like to return to this tradition. Members of the commissions meet at the ISRM International Symposium each year and correspond by email in between. SANIRE will endeavour to raise funding to partially cover the costs of key individuals that would like to attend the 2016 commission meetings in Cappadocia, Turkey (2016-08-29 to 2016-08-31). The 2017 International Symposium (AfriRock 2017) will be hosted in Cape Town, South Africa and SANIRE would like to encourage members to participate then. Please contact William Joughin if you would like to participate in any of the commissions. The following commissions have been approved for 2015–2019:

  1. Application of geophysics to rock engineering
  2. Crustal Stress and Earthquakes
  3. Discontinuous Deformation Analysis (DDA)
  4. Design Methodology
  5. Education
  6. Evolution of Eurocode 7
  7. Grouting
  8. Tunnelling in Hard, Faulted, Water Bearing Rock, with Possible Squeezing or Rock Burst – Lessons Learnt and Recommended Best Practice (previously Hard Rock)
  9. Petroleum Geomechanics
  10. Preservation of Ancient Sites
  11. Radioactive Waste Disposal
  12. Rock Dynamics
  13. Soft Rocks
  14. Subsea Tunnels
  15. Testing Methods
  16. Underground Nuclear Power Plants
  17. Underground Research Laboratory (URL) Networking

Suggested methods

A new suggested method has been approved by the ISRM Board:

  • ISRM Suggested Method for In Situ Microseismic Monitoring of the Fracturing 2 Process in Rock Masses

South African research features in this suggested method.

Online lectures

A new online lecture has been recently presented and is available for viewing or downloading on the ISRM website.

  • 12th ISRM Online lecture: Prof Ove Stephansson. “Rock Stress and Stress Fields”

Rocha medal

Jaco Le Roux’s PhD was submitted for the Rocha medal 2017. Nominations are now closed. The Rocha medal is awarded to the best PhD in Rock Mechanics.

deonInterview questions

Full Name: Deon Louw

Position: Unit Manager – Rock Engineering Beatrix 3#

Company/Organisations: Sibanye Gold

Date and Place of Birth: Born in Bellville, Cape Town, on 4 March 1960

Education: Matriculated at Bothashof, Salisbury (now Harare)

First Job: Learner Official Mining, Buffelsfontein Gold Mine, Genmin

Personal Best Achievement/s: The design and actual early extraction of the Beatrix 3# Shaft pillar

Philosophy of Life: Too much of anything is not good. Live a balanced life.

Favourite Food/Drink: A good Irish whiskey (Here, I ignore my philosophy). I love chicken – braaied or grilled – with Portuguese spice.

Favourite Sport: I work only because my golf is not good enough.

1. How did your career in the mining industry begin and where are you now?

Following the completion of my military service in 1980, I started off at Buffelsfontein Mine as a Learner Official and later became production Shiftboss, mostly at Orangia Shaft. In 1987, a neck injury in rugby forced me to assist the Rock Engineering Dept for 6 months, while I could not go underground. This was the first time that I was really exposed to Rock Engineering and I immediately became very interested in the subject. Shortly after my return to underground, I applied for the position of Strata Control Officer and Joined the RE Dept. I obtained my COM Cert in 1990 and moved to Beatrix mine in the Welkom area in the same year. During the next 10 years, I toured the Welkom Goldfields, working at Oryx Mine, St Helena and back to Beatrix again, working for the same company. (Genmin, Gengold, Gold Fields). In 2002, I joined Brentley, Lucas and Associates, and was based at Bambanani Mine until 2011. It was an interesting 9 years, with Bambanani experiencing serious problems in their orepass systems, and eventually scaling down to a shaft pillar extraction. During this time, I also did a lot of consulting work on smaller diamond mines, as well as at the Afrikander Lease operation in North West. In 2011, I was offered the position of Chief Rock Engineer at Beatrix mine and moved back there, saw the unbundling of Goldfields and the creation of Sibanye Gold, and am still quite happy in my role as Rock Engineer at Beatrix 3#.


“Confidence. You need to show confidence”                            “Confidence sells!”


2. Why did you choose Rock Engineering?

I was very fortunate to be exposed to RE early in my career and to then be able to make the career change to Rock Engineering. It is probably the most interesting, challenging and exciting discipline in the mining industry. No two days are the same, no two problems are the same, and no two people are the same. Every day, there is something new and you keep on learning and gaining experience every day.

3. Please tell us a bit more about your career journey?

Covered in 1.

4. In your opinion, what are some of the challenges that the fraternity is currently facing?

I think our biggest challenge currently is that our design function is under threat. There is a tendency that we shouldn’t design support to suite, but rather to design for the worst case; if one operation utilises a system, it must be implemented throughout, whether it is relevant or not. It is no longer a case of designing out or reducing the risk in the mining of a block ground, but rather that if there is risk, abandon it. We can only overcome this by educating the prescribers and enlightening them in the principles of Rock Engineering.

5. What are some areas that you believe will become of increasing importance in the near future of the rock engineering discipline?

I believe we will be required and that we need to play a much larger role in the ongoing planning of workings. The expertise is no longer there, as it used to be, and once again, we need to coach and educate.

6. What advice would you offer people aspiring to be in your position?

Confidence. You need to show confidence: when you present a plan, or when you motivate a new support system, mining sequence, whatever. Confidence sells! Even if you yourself are not too confident in what you propose, propose it with confidence.

7. Who is your role model/mentor?

I cannot single out one person. There are too many people that I came into contact with in my career who all contributed in my life, whether big or small. Each person has something to offer which will benefit you in some way.

8. What is the best advice you have ever been given?

It’s a golfing tip – Aim high, don’t set a low target because then you will hit the ball low. And it is the same in life, set your goals high.


darrylInterview questions

Full Name: Darryl James Slawson

Position: Senior Rock Engineer

Company/Organisations: Northam Platinum: Booysendal Division

Date and Place of Birth: 13 October 1987, Morningside, Johannesburg

Education: BSc Geology; BSc Hons Environmental Management

First Job: Pharmacy Assistant

Personal Best Achievement/s: Obtaining my Rock Mechanics Ticket

Philosophy of Life: Everything happens for a reason

Favourite Food/Drink: Pasta/Hansa

Favourite Sport: Rugby

1. How did your career in the mining industry begin and where are you now?

I started my mining career at AngloGold Ashanti (Tau Tona Mine) in 2011 as a Rock Engineering MT.

2. Why did you choose Rock Engineering?

Well, I think Rock Engineering chose me …. When I went for an interview at AngloGold Ashanti in 2011, I really had no idea what Rock Engineering was all about. After making it through the second round of interviews and a rather intense psychometric test, I was offered employment at Tau Tona mine. After having done some research about the mine, I automatically felt proud of being an employee of one of the world’s deepest mines. When I started working it was all rather overwhelming, which literally forced me to learn quickly. Within a few weeks of working at Tau Tona, I quickly gained a keen interest in mining and, of course, Rock Engineering. Since then, I’ve always tried to learn and gain as much knowledge as possible. I still have a huge amount to learn and am looking forward to the challenges ahead.

Study … study … study. Take the time to learn from experienced professionals. Never be too scared to ask questions.

3. Please tell us a bit more about your career journey?

My career in Rock Engineering started on the 5th of April 2011 at Tau Tona Mine. Eight months later, I obtained my Strata Control Ticket. In 2013, I then joined Moab Khotsong Mine where I really learnt a huge amount about Rock Engineering from my peers and supervisors, which stood me in good stead for obtaining my Rock Engineering Ticket in 2014. I have currently worked at Northam Platinum: Booysendal Division for the past year as a Senior Rock Engineer.

4. What are some areas that you believe will become of increasing importance in the near future of the rock engineering discipline?

With the current economic climate, and specifically commodity prices, our (Rock Engineering) role in ensuring safe production at the lowest possible cost will become of increasing importance.

5. What advice would you offer people aspiring to be in your position?

Study … study … study. Take the time to learn from experienced professionals. Never be too scared to ask questions.

6. Who is your role model/mentor?

Gary Dukes and Johan Oelofse have had the biggest influence on my career and gave me a huge amount of support and guidance with regard to working towards the Rock Mechanics Ticket.

7. What is the best advice you have ever been given?

Never underestimate yourself ….

histSouth Africa is without doubt one of the best places in the world to study the entire history of the planet. Because of its particular, and perhaps unique, geological environment, situated as it is on one of the oldest and most stable cratons in the whole world, it has exposures of the earliest rocks on the planet, dating back almost to the very first quarter of the Earth’s existence, once the fireball had cooled down. They tell of the break-up of super-continents long before Gondwanaland ever existed – lavas spewed out in the depths of deep, ancient oceans, similar to those currently being extruded along the mid-Atlantic ridge and elsewhere.

South Africa’s not very much younger sediments, their deposition dating back to as much as three billion years ago, not only contain some of the world’s largest repositories of base and precious metals and minerals, but also trace the conversion of the hostile, oxygen-deficient environment of our planet to the more benign environment that we enjoy and that we are busy destroying today, together with evidence of the very first life-forms to appear; life forms that were in fact instrumental in the process of converting the atmospheric and terrestrial environment, paving the way for our own evolution. The exposure of this evidence close to surface was facilitated in part by one of the largest, and certainly the oldest, known meteorite impacts the world has evidence of. All of this evidence of the pre-history of our planet can readily be seen in numerous exposures situated within short walking distances of the centre of Johannesburg.

Admittedly, there then follows a short billion year gap in the South African record, during which time the trilobites ruled the planet and nothing much else happened, until one is once again able to trace the course of history in the sediments of the Karoo sequence, and follow the evolution of fish, plants, insects and reptiles, starting in a frozen wasteland and progressing through the most luxuriant rain-forests the world has ever seen, to arid desert conditions just before the onset of the eventual break-up of the Gondwanaland super-continent into the land masses that we are so familiar with in the southern hemisphere today. Even the conversion of some reptiles into our mammalian ancestors can be witnessed during the latter stages of the life of this super-continent. This entire record, including evidence of the break-up, can be readily traced during a short three-hour drive from the seaside of the Natal coast to the mountains of the Drakensberg range. Nearly 200 million years of pivotal history in space of only a few hours, right here, under our noses!

hist1If this were not enough, our own evolution from apes to something perhaps only slightly more intelligent and upright is traced in the detritus of world-renowned archaeological cave sites dotted around the country. Admittedly, one would perhaps need some form of vehicular transport, like a bicycle, to get to some of these exposures in less than a day from central Johannesburg. Even evidence of our progress in learning to at last be able to harvest the bounty of the seas, which began about 150 000 years ago, and which is not recorded anywhere else in the world, and the world’s oldest decorated tools for creating works of art more than 75 000 years ago, are to be found locally (albeit you might have to catch the train from Johannesburg – assuming that they still run in the new South Africa) in the caves of our Cape coast. We may even have the direct descendants of these ancient people living amongst us today – although, of course, their hunter/gatherer lifestyle is under enormous threat and is likely to disappear, together with the rhino, elephant and other endangered species, in the not too distant future.

Moving on to relatively more recent times, the remains of settlements and of pre-historic and historic tunnelling and mining operations by our ancestors are to be found all over southern Africa, including Johannesburg itself where, for example, stone-age hearths and foundries for the production of ironware are battling to be preserved in some of the koppies surrounding the city.

The history of modern mining in South Africa is inextricably tied up with the more recent history of South Africa itself, or, perhaps more correctly put, the history of the country as a whole since the middle of the nineteenth century, which has been dominated and determined by the history of its mining activities. Although early mining ventures in the colonies, such as the exploitation of copper deposits around Springbok, and even the much later gold rushes of the Barberton and Pilgrims Rest areas, did not have a profound effect on the development of the country, it was the discovery in 1869 of the volcanic source of vast diamond reserves, centred initially around what became the Northern Cape town of Kimberley, which paved the way for the conversion of the country from a rural and pastoral backwater into the industrialised powerhouse of sub-Saharan Africa, and which set the stage for the economic, social and political transformation and expansion of the country. The discovery seventeen years later in 1886 of the world’s largest repository of gold in the conglomerate rocks of the Witwatersrand ridge adjacent to what was to become Johannesburg, one of the largest, richest, and most influential cities on the African continent, sealed its fate and changed the course of the country’s fortunes forever. The exploitation of these deposits, together with the concurrent working of abundant coal seams and the later discovery of other important metal and mineral reserves, has had, and continues to have, an overwhelming effect and fundamental impact on the broad economic environment of the whole of the southern African region, and has profoundly influenced the historical course of events in the sub-continent.

It seems fitting, therefore, that the introduction and development of our rock mechanics discipline in South Africa during the course of the last century should also have played out against this vast and vibrant historical, economic, social, political and mining backdrop.

dave This story was written by Dave Arnold.
Please feel free to contact Dave with any historical stories for the next edition.